Debian11
按照p3terx大佬的教程配置的 之前do机器配置成功过,尝试了下为腾讯云新加坡轻量配置 结果没有成功向大佬求助下
配置参考的教程:https://p3terx.com/archives/use-he-tunnel-broker-to-add-public-network-ipv6-support-to-ipv4-vps-for-free.html
腾讯云防火墙端口都全开了
15有偿 谢谢大佬 root@VM-8-14-debian:~# ifconfig eth0: flags=4163 mtu 1500 inet 10.0.8.14 netmask 255.255.252.0 broadcast 10.0.11.255 inet6 fe80::5054:ff:fea1:3202 prefixlen 64 scopeid 0x20 ether 52:54:00:a1:32:02 txqueuelen 1000 (Ethernet) RX packets 49443 bytes 56472547 (53.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25859 bytes 5313729 (5.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 he-ipv6: flags=209 mtu 1480 inet6 2001:470:35:48d::2 prefixlen 64 scopeid 0x0 inet6 fe80::2b86:33fd prefixlen 64 scopeid 0x20 sit txqueuelen 1000 (IPv6-in-IPv4) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 11 dropped 0 overruns 0 carrier 11 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 35 bytes 3712 (3.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 35 bytes 3712 (3.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 复制代码
吉林省网友说:local 改10.0.8.14 不能是公网IP
不要你钱了